You can monitor your input’s audio level using the audio meter. When the audio levels are too low, a red warning message appears in the meter. If you are using an analog (XLR or RCA) audio input, you can adjust the audio levels using the slider. When you are using a digital input, the slider is not visible.
Capture tab, Audio meter
If using an analog source,
additional settings will display that allow you to adjust the gain and decibel
ranges shown in the audio meter. Please note that you CANNOT use the slider to
adjust the volume when using digital audio inputs.
For more information, see Adjust Audio Levels and dB Range and Adjust your Audio Source Properties.
Taskbar items
On the taskbar, you will find icons that you can use to update your network and date/time settings and manage disk space. You can also adjust the volume of the Line Out/Headphones port when monitoring the audio while recording or playing back and editing presentations.
Recorder taskbar
|
Item |
Action |
|
Volume Control/Mute |
Click to adjust volume when using the Line Out/ Headphones port. The volume button is only available when accessing the Recorder interface locally. |
|
Network settings |
Click to view or update network settings and perform network diagnostics. |
|
Disk management
|
Click to view or update disk management settings. |
|
Display keyboard |
Click to display an ML Recorder’s on-screen keyboard. |
|
Date and Time Settings |
Click to view or update date and time settings. |
