If a Join service stops, you may have to manually restart it.
To restart a service:
1. Press Windows key + R, enter services.msc, and click OK.
2. Navigate to Sonic Foundry Join Capture Service or Sonic Foundry Join System Service.
3. Right-click the service that has stopped and click Start to restart the service.
|
I-2. Composite (RCA Video) Port |
Connect a video source, directly or through AV equipment, to this port. |
|
I-3. XLR/RCA Port |
If you are using an analog audio source, connect the breakout cable to this port. You will then connect the source to the appropriate connector on the audio breakout cable: •Connect a Balanced XLR connectors (line level) audio source to the breakout cable’s Balanced XLR connectors. •Connect an Unbalanced RCA connectors (line level) audio source to the breakout cable’s Unbalanced RCA connectors. |
Monitor your outputs
Monitor your output by connecting to the appropriate outputs on your Recorder.
|
Output ports |
Instructions |
|
O-1. VGA Out Port |
To send the Recorder desktop to a monitor or projector, connect the monitor’s input to this port using the appropriate cable. |
|
O-2. HDMI Out Port |
(Optional) To send the Recorder desktop displayed in the built-in LCD monitor to an additional monitor or projector, connect the monitor’s input to this port using the appropriate cable. |
Connect peripheral devices
Connect the appropriate equipment to the remaining ports on your Recorder to finish connecting your Recorder.
|
Ports |
Instructions |
|
P-1. Power Connector |
Connect the power cable to the Recorder, plug the DC power adapter into a grounded power source, and press the Power button located on the front of the system. |
|
P-2. PS/2 Port |
(Optional) Connect a legacy keyboard or mouse to this port. |
|
P-3. USB Ports |
(Optional) Connect a keyboard and mouse (not provided) to two of these ports. |
|
P-4. Kensington Lock Slot |
To prevent theft, all Recorders are equipped with a slot that is compatible with Kensington® security slots. A cable harness locks the Recorder to a table or to a rack. Sonic Foundry does not provide the Kensington lock or cable. |
|
P-5. Network (Ethernet) Ports |
Connect an Ethernet cable to one of these ports and then to your network to manage the Recorder remotely and connect it to Mediasite. |
|
P-6. Serial Port |
When integrating your Recorder with an AV control system, you will connect it to this port using a null modem serial cable. |